Lamona LAM3304, Instructions & Installation Manual

Page: 20 / 28

www.howdens.com
Page _ 20
LAMONA Appliances
Electrical connections
IMPORTANT:
Ensure that the electricity supply is switched off before connecting. Your appliance is intended for
permanent installation.
The product should only be installed by a suitably qualified person
The product must be installed in accordance with all local regulations.
Prior to installation, visually check the product for any damage/defects. Do not install if any issues
are found.
Your appliance must be connected to fixed wiring via the use of a double pole switched fused
spur outlet with at least 3mm contact separation. The isolation switch must be accessible after
installation (see technical data for fuse rating). We recommend the use of an RCD device as
additional protection.
The terminology DOUBLE POLE -/+ means that both the live and neutral supplies are switched and
disconnected at the same time.
The terminations labelled SUPPLY are connections for the internal house wiring and the
terminations labelled LOAD are for connection to the appliance.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:-
Blue........ Neutral
Brown......Live
Green and Yellow.....Earth
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your spur box, proceed as follows;
N
L
L
N
LOAD
SUPPLY
LOAD
SUPPLY
DP
250V~
Blue.
(Neutral)
Brown.
(Live)
Green / Yellow.
(Earth)
The appliance may be connected to the mains supply only by a suitably qualified person.
The mains lead must not be clamped, bent, trapped, or come into contact with hot parts of the
appliance.
If the mains lead is damaged, it must be replaced by a suitably qualified person (mains cable
must not be longer than 2m for safety reasons). It should be routed away from the appliance and
not trapped between the appliance and the wall.