Lamona LAM3304, Instructions & Installation Manual

Page: 19 / 28

Exclusive to Howdens Joinery.co Page _ 19
User manual LAM3304
Before installation
The product should only be installed by
suitably qualified persons.
The product must be installed in
accordance with all local regulations.
Prior to installation, visually check the
product for any damage/defects. Do not install if
any issues are found.
Damaged products may cause risks to your own
safety.
The appliance is intended for installation in
Howdens kitchen cabinets.
Installation
• Surfaces, synthetic laminates and
adhesives used must be heat resistant.
• Kitchen cabinets must be set level and
fixed.
• If there is a drawer beneath the oven, a
shelf must be installed between oven and
drawer.
• The following installation drawings are
representational and may not match
exactly with your appliance.
560mm
560mm
585mm - 595mm
(min)
555mm
567mm
555mm
570mm
567mm
20 mm
20 mm
570 mm
min depth
570 mm
min depth
*
*
*
570mm
594mm
595mm
595mm
594mm
585 - 595mm
(min)
Note: Remove carcase rear panel to assist with
oven ventilation.
A minimum of 150cm² ventilation gap is re-
quired as Illustrated
(35mm x 500mm) cut out positioned centrally.
*
Tower Unit Installation
Built under installation
*See Howdens installation manual for further fitting configurations