12_
LAMONA
Appliances
06 - Installation
Installation
General information
,QVWDOODWLRQVKRXOGRQO\EHFDUULHGRXWE\DTXDOLÀHG
installer or engineer.
Please keep to the following points most carefully;
Although every care has been taken to ensure
this appliance has no burrs, or sharp edges, we
recommend that you wear protective gloves when
installing and moving this appliance. This will
prevent injury.
The minimum distances to other appliances and
units are to be observed.
Wall surfaces above the work surface and
in the immediate vicinity of the cooking
hob must be heat resistant.
Laminated surfaces and the adhesive used for
À[LQJWKHPPXVWEHKHDWUHVLVWDQWLQRUGHUWRDYRLG
any damage.
The space for air circulation, located
underneath and at the back of the hob
improves its reliability by ensuring that it
ZLOOFRROGRZQHIÀFLHQWO\
Installations should be carried out in line
with the National Regulations applicable
with this product type.
Note: Avoid installing the appliance next to doors
and under windows. This will avoid the potential
for hot cookware being knocked off the hob when
doors and windows are opened (Risk of burns).
Built-in appliances may only be used after they have
been built-into suitable built-in units and surfaces
that meet the required standards.
Positioning
Choosing your installation
We recommend that you install this appliance in a
work top which is a minimum 38mm deep.
7KHKREFDQEHÀWWHGLQWRDZRUNWRSOHVVWKDQ
38mm deep, but the 25mm gap between hob base
and appliance must be maintained.
Installation above a unit with a drawer or door
The base of the appliance must be protected
from damage e.g. drawers may only be
LQVWDOOHGSURYLGLQJDSDUWLWLRQSDQHOLVÀWWHG
to the required dimensions underneath the
appliance.
Worktop
25mm
Partician
Hob
Partition
INSTALLATION ABOVE A UNIT WITH
A DRAWER OR DOOR
Installation above an oven
Refer to the manufacturer’s instructions for
clearances above the oven. We recommend a
minimum 25mm gap between the bottom of
the hob and appliance
Worktop
25mm
oven or partition
Hob
