_ 07
User manual LAM1625
Touch Controls
The touch controls for your hob have been designed
WRSURYLGH\RXZLWKÀQJHUWLSFRQWURORI\RXUKRE
providing accurate and repeatable power settings
for cooking and an easy clean surface that can be
easily wiped over. When a cook zone is activated the
power setting is displayed for each zone individually,
Controls layout
Initial set up
Before switching on the power supply to the
appliance, switch off any bright lights (such as
cooker hood) and ensure the appliance is not in
direct sunlight.
This is to enable the electronic controls to calibrate
its sensitivity against natural ambient lighting
(approx 30 seconds).
Failure to observe the above will result in the hob
not functioning correctly, (Display showing “FL”).
To rectify remove all strong lighting sources and
re-apply power.
The hob should complete the calibration procedure
satisfactorily and lighting such as cooker hoods can
be used normally.
03 - Using the hob - electric ceramic
7RXFKDWRQHSRLQWWR´MXPSµWRDVSHFLÀFVHWWLQJRUVOLGH\RXUÀQJHUDORQJWKHVHOHFWRU
To select a setting on the selector
ÀJ
