Lamona LAM1216, Instructions And Installation

Page: 14 / 20

14_
LAMONA Appliances
Electrical connections
IMPORTANT: Ensure that the electricity supply is switched off before connecting. Your extractor is
intended for permanent installation.
Your appliance must be connected to fixed wiring via the use of a double pole switched fused
spur outlet with at least 3mm contact separation. The isolation switch must be accessible after
installation (see technical data for fuse rating). We recommend the use of an RCD device as
additional protection.
The product must only be installed by a suitably qualified person. The product must be installed in
accordance with all local regulations.
The terminology DOUBLE POLE -/+ means that both the live and neutral supplies are switched and
disconnected at the same time.
The terminations labelled SUPPLY are connections for the internal house wiring and the
terminations labelled LOAD are for connection to the appliance.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:-
Blue........ Neutral
Brown......Live
Green and Yellow.....Earth
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your spur box, proceed as follows;
The wire which is coloured blue must be connected to the terminal which is marked with the letter
‘N’ or coloured ‘BLACK’. The wire which coloured brown must be connected to the terminal which is
marked with the letter ‘L’ or coloured RED. The green and yellow earth ‘E’ should be connected to the
terminal marked with the following symbol:
N
L
L
N
LOAD
SUPPLY
LOAD
SUPPLY
DP
250V~
Blue.
(Neutral)
Brown.
(Live)
Green / Yellow.
(Earth)