Lamona LAM1216, Instructions And Installation

Page: 12 / 20

12_
LAMONA Appliances
Installation
Clearances and dimensions requirements
560mm
50mm Min
55mm min
400mm min
490mm
Minimum distance
between carcasses must
be equal to width of hob
*
Minimum height to extractor
as recommend in extractor
instruction manual
*
50mm min between hob and rear wall
(>60mm to cut out aperture)
No shelf or overhang of combustible material should be closer than 650mm directly above the
hob.
There must be a minimum clearance of 50mm between the rear edge of the hob and the rear wall.
This clearance must be maintained up to 650mm above the worktop (unless otherwise stated in
your extractor manual).
Place the hob in the aperture, checking the hob is covering the worktop along all four sides. Set the
front edge of the appliance parallel with the front of the worktop.
Secure the hob to the worktop by means of the brackets provided, taking the thickness of the
worktop into account. Your appliance will be supplied and installed using the following installation
method.