Lamona LAM1216, Instructions And Installation

Page: 13 / 20

_ 13
User manual LAM1216
Method 1
The brackets screw directly into the base of the
hob in the positions shown
40mm Hob
Worktop
Screw
50mm
Hob
Worktop
Screw
30mm
Hob Worktop
Screw
Worktop
25mm
oven or partition
Hob
5mm
Installation above an oven
If the appliance is installed with an oven
underneath, please leave at least 15mm of
ventilation, unless otherwise stated in your oven
installation guidelines.
WARNING RISK OF FIRE
The putty seal must be fitted to reduce the
heat transfer between the hob surface and the
worktop. Failure may result in damage to the
worktop and invalidate your guarantee.
Apply a thin bead of the putty seal
(provided) to the underside of the hob.
For best results ensure the putty is applied
evenly, as close to the edge as possible and only
use the necessary amount. Once in position, trim
any access putty away with a blunt knife taking
care not the damage the worktop.
Installation
Putty Seal
Worktop
15mm
oven or partition
Hob
5mm