manualshive.com logo in svg

LAMINOX Idro TERMOBOILER Mini Series, Instructions For Installation, Use And Maintenance Manual

Share
Download
LAMINOX Idro TERMOBOILER Mini Series Instructions For Installation, Use And Maintenance Manual Download Page 5

5 

 

9

 

WARNINGS AND MAINTENANCE ....................................................................................................... 40

 

9.1  Opening the door ........................................................................................................................... 40 
9.2  Ash drawer cleaning ....................................................................................................................... 40 
9.3  Brazier cleaning ............................................................................................................................. 40 
9.4  Combustion chamber cleaning ....................................................................................................... 40 
9.5  Smoke chamber cleaning ............................................................................................................... 41 
9.6  Exhaust system cleaning ................................................................................................................ 41 
9.7  Cleaning metal and ceramic parts .................................................................................................. 41 
9.8  Cleaning the glass .......................................................................................................................... 41 
9.9  Glass breakage .............................................................................................................................. 41 
9.10  Replacing the remote control battery .............................................................................................. 41 
9.11  Cleaning the smoke fan.................................................................................................................. 41 
9.12  Boiler inactivity ............................................................................................................................... 41 
9.13  Routine and special maintenance .................................................................................................. 42 

 

Summary of Contents for Idro TERMOBOILER Mini Series













































Reviews:

No comments

Brands by name

Popular brands

Load more brands