Manual
Combined Wind Sensor ARCO-Modbus
(14581) ARCO-Modbus
Manual
Disposal
LAMBRECHT meteo GmbH is listed and registered at the Stiftung Elektro-Altgeräte Register ear under:
WEEE-Reg.-No. DE 45445814
In the category of monitoring and control instruments, device type: “Monitoring and control instruments for exclusively com-
mercial use”.
Within the EU
The device has to be disposed according to the European Directives 2002/96/EC and 2003/108/EC (Waste Elec-
trical and Electronic Equipment). Do not dispose the old device in the household waste! For an environmentally
friendly recycling and disposal of your old device, contact a certified disposal company for electronic waste.
Outside the EU
Please follow the regulations in your country regarding the appropriate disposal of waste electronic equipment.
Content
1
Introduction
3
2
Start-Up
3
2.1
Installation Conditions
3
2.2
Tools and Installation Aids
3
2.3
Unpacking the Sensor
3
2.4
Goods Inspection
3
2.5
Power Supply
3
2.6
Mounting the Cup Rotor of the Wind Speed Sensor
4
2.7
Installation Procedure (Brief Explanation)
4
2.8
Mounting the Sensor
4
2.8.1 Alignment of Wind Vane
4
2.8.2 Power and Signal Connection
5
2.8.3 Safety Regulations
5
3
Maintenance
5
3.1
Regular Maintenance and Calibration
5
3.2
Visual Check and Cleaning
5
4
Transport
5
5
Dimensional Drawing and Electrical Connection ARCO-Modbus
6
6
Modbus Data Protocols ARCO-Modbus
8
6.1
General
8
6.2
Data Encoding
8
6.3
Standard Configuration - Default
8
6.4
Available Modbus Commands
8
6.5
Instantaneous Values / Realtime Values (Input Register)
9
6.6
Period Data - Average, Maximum and Minimum (Input Register)
9
6.7
Descriptive Sensor Parameter Registers (Holding Register)
10
6.8
Configuration Registers (Holding Register)
11
6.9
Autoconfiguration
11
7
Technical Data
12
2
