LAMBORGHINI R8.230 DCR, Workshop Manual, Page: 5 / 51

V
ConTEnTs
20.4.4 - Transmission alarms 20-230
20.4.5 - Armrest alarms 20-291
20.4.6 - HLHP alarms 20-294
20.4.7 - Canbus alarms 20-373
20.4.8 - Electrohydraulic control valve alarms 20-384
30 - mEThoD of InTErvEnTIon
30.1 - B0 - Engine 30-2
30.1.1 - Engine - Separation from the transmission (B0.00.02) 30-2
30.1.2 - Engine (B0.00.01) 30-8
30.1.3 - Checking the compression pressure 30-14
30.1.4 - Removing and installing the crankcase bleeding 30-16
30.1.5 - Dismantling and assembling the crankcase breather 30-18
30.1.6 - Removing and installing the front cover (opposite side to flywheel) 30-22
30.1.7 - Removing and installing the lubricating oil pan (heavy duty version) 30-24
30.1.8 - Removing and installing the crankshaft 30-26
30.1.9 - Checking the axial clearance of the crankshaft 30-30
30.1.10 - Removing and installing torsional vibration damper 30-32
30.1.11 - Checking the crankshaft 30-37
30.1.12 - Alternator, fuel pump, water pump and fan drivebelt 30-39
30.1.13 - Flywheel 30-40
30.1.14 - Removing and installing the flywheel 30-42
30.1.15 - Fluid coupling and flywheel (R8.270 DCR ->WSXJ400200LL10001) 30-46
30.1.16 - Air conditioning compressor drivebelt 30-48
30.1.17 - Air conditioning compressor belt - Tension adjustment 30-49
30.1.18 - Renewing the crankshaft sealing ring (flywheel side) 30-49
30.1.19 - Renewing the crankshaft sealing ring (opposite side to flywheel) 30-52
30.1.20 - Removing and installing the piston and con rod 30-55
30.1.21 - Checking piston overhang 30-62
30.1.22 - Checking the piston 30-64
30.1.23 - Removing and installing the cylinder liner 30-65
30.1.24 - Checking the overhang of the cylinder liner 30-69
30.1.25 - Testing the cylinder liner 30-70
30.1.26 - Checking the piston rings and piston ring grooves 30-71
30.1.27 - Removing and installing the camshaft 30-74
30.1.28 - Checking the camshaft 30-77
30.1.29 - Removing and installing the connection housing 30-78
30.1.30 - Removing and installing the gearcase 30-80
30.1.31 - Removing and installing the valves 30-84
30.1.32 - Checking and setting the valve clearance 30-87
30.1.33 - Checking the valves 30-93
30.1.34 - Checking the valve lag 30-93
30.1.35 - Checking the valve guide 30-95
30.1.36 - Removing and installing the valve control 30-96
30.1.37 - Removing and installing cylinder head 30-100
30.1.38 - Removing and installing the oil cooler housing 30-105
30.1.39 - Removing and installing the oil cooler 30-111
30.1.40 - Removing and installing the control block 30-112
Find manuals at https://best-manuals.com