LAMBORGHINI R8.230 DCR, Workshop Manual, Page: 34 / 51

10-10
TEChnICal CharaCTErIsTICs
namE sCrEW TYpE noTEs / rE-
marks
sErIEs prE-Clamp-
Ing valuE
Clamping claw
injector on cyl -
inder head
BM8x40 Torx Observe tight -
ening specifi -
cation. Loosen
bolt after tight -
ening with
pre-tightening
value.
TCD 2013 4V 4 Nm 23 Nm
Injection lines
on rail and
pressure pipe
nozzles High-
pressure line
on high-pres -
sure pump
Lock nut SW17 TCD 2013 4V 25 Nm
Fuel pump on
gearcase
M8x25 TCD 2013 4V 30 Nm
High pres -
sure pump on
crankcase
M10x30 multi -
tooth
TCD 2013 4V 10 Nm 50 Nm
Control block
on crankcase
M8x75 / M8x85 TCD 2013 4V 30 Nm
Fuel pipe on
high pressure
pump
D8 Hollow screw
Observe as -
sembly specifi -
cation.
TCD 2013 4V 26 Nm
Fuel pipe on
control block
D10 Hollow screw
Observe as -
sembly specifi -
cation.
TCD 2013 4V 34 Nm
Union screw
for pressure
pipe nozzle
M22x1.5 Observe the
tightening
specification.
TCD 2013 4V 20 Nm 52 Nm
Pressure piece
on the cylinder
head
M26x1.5 TCD 2013 4V 80 Nm
Rail at cylinder
head
M8x30 Observe the
tightening
specification.
TCD 2013 4V 30 Nm
Insert pressure
limiting valve
on rail
with mounting
compound
TCD 2013 4V 100 Nm
Insert rail pres-
sure sensor on
rail
with mounting
compound
TCD 2013 4V 70 Nm
Pipe clip on
gearcase
M8x30 TCD 2013 4V 30 Nm
Holder for
pipe clip on
gearcase
M8x16 TCD 2013 4V 30 Nm
Pipe clip fuel
pipe
M6x16 TCD 2013 4V 13 Nm
Fuel pipe
(feed) on con -
trol block / Fuel
pipe (return) on
rail
M14x1.5 TCD 2013 4V 39 Nm