Продажа, ремонт, сервис и запчасти котлов и горелок Lamborghini
Москва,ул.НародногоОполчения,д. 34,стр. 3 .499) 519-03-79, моб. (903) 615-82-73 [email protected]
RECEIVING THE PRODUCT
The burner is supplied protected by cardboard or cardboard/wood packaging.
WARNING
The instruction manuals are an integral part of the appliance and therefore must be read before installing and
starting the burner and must be kept with care.
The documents envelope, positioned inside the packaging, contains the following material:
- Installation and maintenance book
- Warranty certificate
- Spare parts exploded diagram
HANDLING RECOMMENDATIONS
• Handling must be performed by qualified staff;
• Use suitable accident-prevention equipment;
• It is prohibited to disperse of packaging material in the environment or leave it within the reach of children as:it
can be a potential source of danger. It must therefore be disposed of in compliance with that established by the
lawin force;
• The place of installation must be without dusts, objects or inflammable materials or corrosive gases.
RECOMMENDATIONS FOR U SE
To prevent injury/damage to persons and the environment in which the appliance is used, the following notes must
be complied with!
• Do not open, tamper with or modify the appliance
• Before making any modifications to the connections of the appliance, completely isolate the unit from the mains
power supply.
• Suitably protect the appliance terminals in order to prevent any contact with them.
• Make sure that the appliance is connected correctly (see CONNECTION LAYOUT). Incorrect connection can
damage the appliance and the place of use.
• Falls and mechanical stress can damage some safety functions. In this case, do not install the appliance even
if there is no visible damage.
RECOMMENDATIONS FOR INSTALLATION
• Installation must be carried out by specialised staff. The Standards in force must be respected.
• The place of installation must be without dusts, objects or inflammable materials or corrosive gases.
• Keep the ignition cable separate from the other connection cables of the appliance.
• The protection fuse must respect that indicated in the technical data. If this does not take place, serious damage
can be caused to the appliance and room by a short circuit.
• When checking the components (motor, solenoid valves, etc...) outside the control appliance, the latter must not
be connected.
• Check that the maximum load supported by the output terminals is not exceeded.
NOTES FOR REPLA CEM EN T OF THE APPLIA N CE
• Every time the appliance is replaced, check connections and safety functions
• The appliance is made up from electric and electronic components; therefore it must be disposed of in complian
ce with local Directives in force.
66
