49
EN
Cod. 3541Z090 - Rev. 05 - 05/2022
IDOLA S 3.2
Holiday mode (Holiday)
Menù Hp > Options > Holiday
This function is intended to prevent the house from freezing in winter when you are away from home for holidays and to reactivate the unit shortly before the end of
the holidays.
In holiday mode, the heating set point, the DHW set point, the management of the DHW valves / pumps and the system are managed independently by the hydronic
board.
Enabled Y/N
activates holiday mode
Dhw Mode On/Off
to set if DHW is on/off during the holidays
Disinfect On/Off
to set if the disinfect function is enabled/disabled during the holidays
Heat Mode On/Off
to set if the heating mode is enabled/disabled during the holidays
From Date
first day of holiday
Until Date
last day of holiday
If DHW and Anti-legionella is enabled, the Anti-legionella function is temporarily disabled and an anti-legionella cycle will be performed at 11.00 pm on the last day of
vacation.
All timed functions are disabled.
The climatic curves are temporarily disabled and will automatically return to validity at the end of the holiday period.
The set point is not valid, but the value still appears on the main page.
Plant Backup Heater (Backup Heater)
Menù Hp > Options > Backup Heater
It allows (only in Heat mode) to force the activation of the electric system heater and make the heating of the water sent to the heating system more speedy.
Bckp Heat On/Off
Enabling and disabling of back-up electric heater (1=ON - 2=OFF)
8.7.4 Service information
Parameters (Parameters)
Menù Hp > Service information > Parameters
In this menu it is possible to consult the following parameters:
Main Set Temp
system temp set point temp based on selected mode
Main Actual Temp
Water delivery temperature (TW_OUT)
Tank Set Temp
Setpoint DHW heater (T5s)
Tank Actual Temp T5
Temperature DHW heater (T5)
Smart Grid Run Time Info
total daily run time of the smart grid
Display
Menù Hp > Service information > Display
In this menu it is possible to set the time, date, language, backlighting, unit operating time with Smart Grid input active .
Date and time
to set the date and time
Contrast
on/off
to set the display contrast
Brightness
to set the display brightness
Backlight time
to set the start of the backlighting
Smart Grid
Smart Grid Run
Time
set working time for SMART GRID
Error code (Error code)
Menù Hp > Service information > Error code
In this menu you can consult the chronological list of the last 10 alarms (the first in the list is the last one) complete with the date and time of the intervention.
Error List
Code
error codes
Date
date of the event
hh.mm
time of the event
8.7.5 Operation Parameter (Operation Parameter)
Menù Hp > Operation Parameter
It allows you to view all the operating parameters of the unit.
