background image

21 

 

ENGLISH 

 

First Section - FOR THE USER 

 

WORKING AND USE 

The dishwashing machine can wash up to 600 dishes per hour.  
The machine protection degree is IP21, therefore it should not be washed with direct high-pressure jet water. 
The objects to be washed should be correctly arranged for a good washing-up result. 
We suggest rescaling dishes, from time to time, in order to remove calcareous and/or starchy sediments by soaking it in suitable 
solutions suggested by your cleansing agent supplier. 
If you need to buy new dishes remember the following: Dishes and cups: preference must be given to china or non-porous pottery 
articles, with smooth surface. Glasses: choose a glass suitable to be washed in dishwashing machines. Surfaces must be smooth and 
bottoms the least concave possible. 

 

OPERATION  BEFORE WASHING 

B

EFORE STARTING  THE WORKING OPERATION BE 

SURE THAT

-  the cock is open; 
-  the filters and the overflow are in   
     their housings; 
-  the wash arm and the rinse arm are free to  
 pivot; 
-  rinse aid pump and detergent pump are not 
empty. 
 
T

HEN PROCEED

 

A

 - 

Open    the   door   and   put into the tank,  

over the pump suction filter, about 

54

 gr. of detergent.  

Then, every 10 cycles, add about 

40 

gr. of detergent. 

If the machine is provided with an automatic dosing 
device, check that the detergent is in its container. 

 

B

 - 

Place the dishes in the baskets minding to  

 

previously remove all solid waste and fat. Soak 

previously the cutlery and if necessary the dishes too 
if they are washed after long time since the use. Do 
not overload baskets, dishes must not be placed one 
upon the other, water must have the way to run on 
each part of the same.  

 

C

    - 

Turn the machines on by the wall switch.  

Light indicator Cycle “C” turns RED.

 

The machine is live (stand-by). 
 
The different colours of the cycle pushbutton “C” 
indicate in which phase of the cycle your dishwasher is. 
Standing red colour: live machine (stand-by). 
Flashing yellow colour: heating or filling phase. 
Standing yellow colour: tank filling end; 
Standing green colour: machine ready;  
Standing blue colour: washing phase; 
Flashing blue colour: rinsing phase; 
Flashing red colour: door is open; 
Flashing sky-blue colour: manual drain; 
Standing purple colour: self-cleaning cycle; 

 

D

 – Press the main switch “A” during 2 seconds. 

Cycle pushbutton “C” 

becomes yellow and 

flashes

 until the tank filling has been completed.  

 
Once tank filling is completed, the thermometers 
indicators light up. 

 
 
 
Open the door and 

introduce the basket in the 

dishwasher. 

 
E

 – 

Choose the washing period  cycle and push the   

button “

B

” between the following items: 

- lamp 1 lightening – short cycle of 2 minutes  
- lamp 2 lightening – medium cycle 3 minutes 
- lamps 1 and 2 lightening at the same time 
long cycle of 4 minutes. 
The washing period cycle has to be chosen regarding 
the dirt that has to be removed. 

 

F – 

Close the door of the dishwasher. 

       Before starting the cycle, make sure that the button 
cycle “

C

” is green. This indicates that wash water and 

rinse water have reached the good working temperature 
(85-90°C). 
Press cycle pushbutton “C”. 
The dishwasher starts the washing with the duration 
you have chosen. Additional to this period there will 
be a pause of 5 seconds and a rinsing phase of 18 
seconds with clean water at 85- 90°C. 
The pushbutton is blue during the washing and starts 
flashing in the final rinse phase. 
At the end of the cycle, the pushbutton becomes green 
and the machine is ready to do a new cycle (if the 
pushbutton is yellow , this means that the machine is 
reaching the good working temperature). 
 

Only for machines with steam condenser! 

 
At the end of the washing, the steam suction fan starts 
running automatically.  

 
 
It is possible to interrupt the washing cycle at any time 
simply pushing again the wash time selection 

button 

“B”. 

 

Rinse

 will start only at the reached working 

temperature. That means that the duration of the 
washing cycle you have chosen will be extended up to 
having reached the exact temperature (thermocontrol). 

 

G – Extracting the basket, incline and shake it 
carefully. So the rest of the water drops will be 
eliminated. 

Summary of Contents for P440-CV
























































Reviews: