lamber MATIC-M-MA Series, Instruction Manual

Page: 34 / 80

34
visualizes now WASHING ENABLED
and MACHINE ON).
4)
Select the conveyor speed according to
the objects to wash, and push button
“E” (led “F” corresponding to the
selected speed will light up).
5) Push the START button “G” to start the
washing and to move the racks (the
display information visualizes now IN
CYCLE).
6)
Introduce the rack in the tunnel and
follow the warning instructions indicated
on paragraph “washing instructions”
(see pag. 39).
7) The rinsing operation starts
automatically at the passage of the
dishes (led
“N ” lights up) (the display
visualizes now IN RINSING CYCLE).
If the lamp
“N ” does not blink there is a
problem at the rinsing electrovalve (call a
qualified technician).
8)
Should it be required to stop the rack
basket moving, push button
”E” for 3
seconds. To Re/start rack basket
moving push button “E”.
9) To stop temporarily the rack basket
from moving and to interrupt the
washing, push the button
“H ” on OFF
position (led off). The other heather
elements stay ON
(Stand-by position) .
10) To turn off the Dishwasher, push the
button
“H” and then “A ” (led “B ” off).
7.2 Checking Device:
The display “V” is blinking and visualizes the
writing “Door open”, it indicates that one
of the door was not closed correctly.
Close the door again.
The display “V” is blinking and visualizes the
writing “Roller conveyor stop activated”,
take out the basket at roller conveyor
stop.
The display “V” is blinking and visualizes the
writing “motor Alarm! ”, it means that
there is a problem at the overload cut-
out indicator.
Call a qualified technician.
During the normal operation of the Dishwasher
the display ”V” will help you to
understand which operation the
machine is performing.
The display “V” is blinking and visualizes the
writing “CALL SERVICE! ”. The display
inform that the maintenance is
necessary. The SERVICE function
allows to program the maintenance
interventions that have to be done on
the machine, according to the kind of
use. Call a qualified technician.
7.3 Optional Devices:
If the machine is equipped with a Drying tunnel
it is possible to activate the function of
this optional device by pushing the
button
“O” (led on);
If the machine is equipped with a pre-rinsing
device, it is possible to activate the
function of this optional by pushing the
button
“P” (led on);
If the machine is equipped with a heat pump, it
is possible to activate the function of
this optional by pushing the button
“Q”
(led on).