background image

 

6

INTRODUCTION  

 

  

AND SAFETY NORMS

             

 

 

INTRODUCTION 

 

This equipment is destined only to the use it has been conceived for: tableware washing 
such as dishes, glasses, cups, cutlery, trays, etc. Using it to wash machine components or 
objects whose dimensions are superior to the machine working passage is improper and 
therefore dangerous.

 

- Equipment in compliance with EEC89/336 directive concerning the suppression of radio 
interferences and electromagnetic incompatibility. 
- In conformity with the EEC directives and the fulfilment laws, our dishwashers are built 
according to the regulations in force in Italy and abroad. 
- The noise of the machine running empty, measured at the working positions (fig. 1) and at 1.6m 
from the floor, is the following: 
 
 

position 1 

position 2 

position 3 

Leq A 

Level equivalent 

of sound pressure dB(A) 

70 

68 

70 

 
The level of peak sound pressure Lpc is not declared as it is much inferior to 130dB(C): 
 

 

 

 
 

PRELIMINARY OBSERVATION 

 

Carefully read the instructions reported in the present user manual, as it gives important 
indications about safety of installation, operation and maintenance: 

carefully keep the present manual for further consultations; 

the illustrations and drawings showing the machine are intended for general reference only 
and are not necessarily accurate in every particular; 

the dimensions and characteristics of the machine, given in this Manual, are not to be considered 
binding and may be changed without prior notice; 

having removed the packing material, check that all the equipment is present. If there is any 
doubt, do not use it and contact qualified personnel. The packing elements (plastic bags, 
nails, etc.) should be kept away from children, because they are dangerous. 

 

This equipment is destined only to the use it has been conceived for: tableware washing 
such as dishes, glasses, cups, cutlery, trays, etc. Using it to wash machine components or 
objects whose dimensions are superior to the machine working passage  is improper and 
therefore dangerous.

 

Summary of Contents for LINEAR 30































Reviews: