lamber F92-dy, Instruction Manual

Page: 21 / 79

CLEANING AND PREVENTIVE
MAINTENANCE
PRECAUTION AND CLEANING
INSTRUCTIONS
-
IMPORTANT : Before carrying out the
cleaning and maintenance operations,
disconnect the equipment from the mains
power supply:
-
Follow the directions on the maitenance in
this guide;
- Wear protective clothing and gloves when
challenged elements are impregned with
clearing solution;
-
high temperatures can be reached inside
the machine (90°C). After power supply has been
removed, wait until the machine has reached
room temperature, before working on it.
- never leave tools, parts or other loose
material in or on the machine;
-
Chek that there are no rusting foreign
bodies, because of the material “stainless steel”
could begin to rust. Rust particles can come from
non- stainless steel dishes or damaged wire
baskets.
-
Do not wash the machine and the area
surrounding it with fire hydrants, steam jets of
high-pressure cleaners;
-
When clearing the floor be careful not to
saturate the base of the machine, in order to
avoid a prolonged stagnation of water;
-
To clean the inside of the machine, use a
brush or a soft cloth;
-
To clean the machine do not use abrasive
cleaners;
-
BEFORE starting machine or cycle, after
any maintenance or repair work, make sure
all protectives are correctly installed;
Attention. Before carrying out cleaning
the inside of the machine, make sure that there
are no foreign objects that could damage the
rusty steel inside the tank. The eventual rust
particles could come from non-stainless steel
dishes, from baskets or damaged water pipes
not rust-proof.
DAILY MAINTENANCE
-
Turn off the machine by pressing the
switch “A” and drain the water from the
tank by removing the overflow;
(Attention! In case of machines with drain pump,
there is no Overflow ! );
-
Wait until the water is drained and there is
no debris on the bottom of the tank.
- Proceed to the specific operation of daily
clearing as descrbed on the next page
Please pay attention to the opening and
closing of the door of the Dishwasher. Do not
use the machine if you are wearing
clothes/items that could get entangles in the
dishwasher parts. As they can limit personnel’s
regular moving ability!
-
If there is an extended downtime is
advisable to prevent the formation of
unpleasant odors and leave the hood
raised.
- When the machine is to remain idle for a
long time, drain all the water from the
boiler (the drain plug is located on the
lower side of the boiler) and from the
electropump. Also leave the wash tank
open.
NEVER WASH THE EXTERNAL PART
OF THE MACHINE WITH A WATER JET