LAMAX eFalcon ATV50M, User Manual

Page: 22 / 150

16
EN
CS
CS
CZ
CZ
CZ
CZ
CZ
FRONT AND REAR SHOCK ABSORBER ADJUSTMENT
–
The hardness of the rear shock can be adjusted to the weight of the rider. This can be done by turning
the nut on its lower part. By turning the nut clockwise, you reduce the stiffness of the shock absorber. By
turning the nut counter-clockwise, you increase the stiffness of the shock absorber.
CONNECTIONS AND SCREWS
–
Regularly check the tightness of all connections and screws.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Quad bike will
not start
Short circuit fuse activated
The fuse will stop the motorcycle if it is
overloaded, or if the driving conditions
are too extreme. The fuse must be manu-
ally deactivated.
Fuse blown due to overload Replace blown fuse with a new one
Loose wires or connectors
Check and secure all wires and co-
nnectors
Non-functioning battery
An old or unmaintained battery can be
inoperable. Replace the battery with a
new one.
Uncharged battery
Charge the battery properly according to
the instructions.
Damaged/failing switches or motor
Have it checked and repaired at an
authorised service centre.
Quad starts, but
suddenly stops
Loose wires or connectors
Check and secure all wires and co-
nnectors
Short circuit fuse activated
The fuse will stop the motorcycle if it is
overloaded, or if the driving conditions
are too extreme. The fuse must be manu-
ally deactivated.
Reduced
operating time
Uncharged battery
Charge the battery properly according to
the instructions.
Old battery no longer at full capacity Replace the battery with a new one.
Quad motor
power is weak
Loose wires or connectors
Charge the battery properly according to
the instructions.
Old battery no longer at full capacity Replace the battery with a new one.
Quad bike is overloaded
Do not overload the quad bike, use
it in accordance with the operating
instructions.
Driving conditions are too bad/difficult
The quad bike is designed for operation
on level ground. Do not operate the
quad in excessively difficult terrain or in
poor driving conditions.
Intermittent
operation
Loose wires or connectors
Check and secure all wires and co-
nnectors
Damaged/failing switches or motor
Have it checked and repaired at an
authorised service centre.