O & M Manual – Insulated Case ATS Rev: October 2020
Publication Number:
MN0100700E
Version: V10.01.20
Page 39
4.2.6.
ATS Time & Date Change
1.
To get to the editor screen to view timer settings, press the
and
buttons at the same
time. The screen will display "Editor – Display" at the top once in Editor Mode.
Figure 24 - Editor – Display Screen
2.
Press the Down arrow under to the
button until the screen shown in Figure 25 - Editor
- Display - Current Date and Time is seen.
Figure 25 - Editor - Display - Current Date and Time
3.
Press the
button and the :01 text for the "Seconds" setting will start blinking.
4.
Press the Up / Down Arrow Keys next to the
button to change the "Seconds" setting.
5.
Press the Left Arrow Key next to the
button to increment to the "Minutes" setting.
6.
Repeat steps 4 and 5 to adjust the following "Minutes", "Hour", "Year", "Month" and "Day"
settings.
7.
Press the
button to select changes.
8.
To exit Editor Mode, press the
and
button at the same time for approximately 5
seconds. The screen will then display "Status" at the top of the screen, then return to
source display screen.
9.
Press the "Auto"
button to place the ATS back in "Auto" mode.
