12
FREQUENTLY ASKED QUESTIONS
Question:
Why is the nutriSHOT
®
not blending?
Answer:
Check that the cup and blades are attached correctly and locked onto the
base. Check the nutriSHOT
®
is switched on at the socket.
The nutriSHOT
®
has a safety cut out and will stop if the motor overheats.
Switch off the appliance at the socket and allow the motor to cool for 5
minutes before restarting.
Question:
Why are the blades not turning?
Answer:
The blades may be jammed or the mixture is too thick to process. Switch off
the nutriSHOT
®
and unplug. Carefully remove the ingredients blocking the
blade. You may need to blend in smaller batches.
Question:
Why has some of my drink leaked out from the cup during blending?
Answer:
The blade is not screwed onto the cup or located on the base unit properly.
There are too many ingredients in the cup. Switch off the power and check
the cup is not filled beyond the ‘
MAX
’ mark.
Question:
Why is my nutriSHOT
®
slowing down during use?
Answer:
The cup is too full. Turn off the nutriSHOT
®
, unplug and allow to cool for at
least 5 minutes. Check the cup is not filled beyond the ‘
MAX
’ mark. Remove
some ingredients from the cup and reblend.
Summary of Contents for Nutrishot
Page 1: ...INSTRUCTION BOOKLET Model 31576 ...
Page 15: ...15 ...
Page 16: ...16 ...
