www.hurom.com
l
19
SPINNING BRUSH ASSEMBLY
Insert the silicone brush into the
spinning brush.
According to the No. 1 above, let the longer part
of inner wing ▼ face upward.
Hold the outer wing ▼ of silicone brush with
your thumb and index finger and insert the inner
wing into the groove of spinning brush.
Check the groove of the spinning brush
and the direction of silicone brush.
There are grooves to insert silicone brush in the
spinning brush.
Silicone brush has inner wing ▼ and outer wing
▼ .
As shown to the left, let ‘inner wing’ face the spinning
brush.
1
2
1
2
Pull the inner wing tight enough.
Push silicone brush from the outer side of spinning
brush and pull ‘inner wing’ in the direction of inside
of the spinning brush with the other hand as shown
to the left.
Pull it until you cannot pull it any longer.
If units are operating without fully assembled, there is
a risk of breakage.
Hold up and down of ‘outer wing’ and pull it tight
enough.
3
2
1
Brush
groove
Inner
wing
Outer wing
1
2
1
2
SPINNING BRUSH
SILICONE BRUSH
Up
(longer part)
Down
(shorter part)
HE_4PJ12170_V.01.indd 21
2013-01-24 오후 4:38:28
