13
6. If a leak is found, turn the black lever to the horizontal off position and remove from
the gas cylinder and do not use the oven until an approved liquid propane gas (LPG)
engineer has repaired.
DISCONNECTING THE PATIO GAS LPG PROPANE CYLINDER GAS REGULATOR
1. Turn the black lever to the horizontal off position to turn off the gas and make
sure the burner valve is off. Leave the oven to cool.
2. Depress the black button under the On/Off lever to remove the gas regulator valve
from the gas cylinder.
3. Replace dust cap for cylinder valve outlet whenever the cylinder is not in use.
LEAK TESTING
GENERAL
Even though the gas connections of the Gas Pizza Oven undergo a leak test before
packing and shipping, it is essential to conduct a thorough test at the installation site.
Prior to each use, examine all gas connections for leaks using the specified procedure.
If the scent of gas is detected at any point, cease use immediately and inspect the entire
system for leaks.
BEFORE TESTING
Make sure all packing material has been removed from the Gas Pizza Oven.
Prepare a
mixture comprising one part liquid detergent and one part water. You will require a spray
bottle, brush, or cloth to administer the solution onto the fittings.
TO TEST
1. Shut OFF the burner valve.
2. Adjust the gas regulator valve to the vertical ON position.
3. Use the soap solution on all gas fittings; bubbles will indicate a leak.
4. In case of a leak, promptly turn off the gas supply and tighten the affected fittings.
5. Restore the gas supply and re-examine.
6. If gas persists to leak from any fittings, turn off the gas supply and reach out to the
Lakeland Customer Services team on 015394 88100 or [email protected]