7
• Put the lid on top of the blender jug and push it down. Always ensure the lid is firmly in
place before operating, or the blender will not work.
• Insert the measuring cup into the lid, turning clockwise until it locks into place.
BLENDER SPEED SETTINGS
The blender has LOW and HIGH speed settings plus a PULSE function.
0: OFF
1: LOW,
for softer food and small portions.
2: HIGH,
for harder food and larger portions.
P: PULSE,
is a short burst of high power for quick blending.
The pulse function can be used to break apart larger pieces
of food or to control the texture of food when chopping.
Move the dial manually to (P) and hold in short 2 second
bursts. This setting is suitable for ice, the maximum amount
of ice you should blend is 150g.
INSTRUCTIONS FOR USE
Ensure the dial is at ‘0’ OFF.
Plug in and switch on at the socket. Add your liquid or food to the jug. Do not use the
blender without any food or liquid inside. Always ensure the blender is filled with a
minimum of 500ml of liquid or food. The maximum amount of food is 500g and the
maximum amount of liquid is 1500ml.
DO NOT
use the blender for hot liquids and excess foods, pressure may build up inside
the blender and this could cause the lid come off and the contents to splash out. Allow
hot food and liquids to cool to room temperature before blending.
Turn the dial to the speed you need, to turn the blender on.
Alternatively turn the dial manually to the ‘P’ position to pulse.
Use the blender in short bursts and
DO NOT
operate continuously for more than 2 minutes.
Never reach into the blender jug with utensils when the blender is running.
The removable 20ml measuring cup in the lid makes it easy for additional ingredients to be
added whilst you blend.
REMOVING THE LID
Twist the jug anti clockwise and take it off the base.
Slide the lid release button back with your right hand and lift
the lid up and to the left with the other.
The lid and lid release button are deliberately fitted tightly to
prevent leaking during blending.
J19704_SpaceSaverBlender.indd 7
03/11/2015 10:48