6
USING THE SPACE SAVER BLENDER
FOR THE FIRST TIME
• Unpack the Space Saver Blender, remove all the packaging
materials. The blender jug and lid will already be on the base unit
as you would store them in your cupboard. Take everything apart
for washing.
• Before first use, wipe the base unit with a clean, damp cloth.
• Wash the rest of the parts in warm, soapy water, rinse and
dry thoroughly.
• Make sure all parts are clean and dry before assembling the
product.
• The silicone ring must be fitted over the blade.
• The blade sits inside the blade base.
• These then screw into the base of the jug.
• Turn the jug upside down so you are looking at the base.
The blade base has three notches on the outside. Two of
these need to be in line with the notches either side of the
handle on the blender jug.
• Sit the blender jug onto the base with the handle towards
the back right hand corner. Turn it in a clockwise direction so
it locks onto the base.
• The blender can only be switched on if the jug is locked onto
the base correctly.
Notches
Notches
J19704_SpaceSaverBlender.indd 6
03/11/2015 10:48
