9
WARNING
• Ensure the lid is fully closed before switching on.
•
DO NOT
open the lid when milk is heating, scalding may occur if the lid is lifted.
•
DO NOT
touch any moving parts whilst in use. Always switch off the appliance
and wait until the whisk has stopped rotating before you open the lid.
• Remove the Milk Frother from the base to fill or pour. Pour slowly and do not
over-tilt the Milk Frother.
TO MAKE HOT FROTHING MILK – LIGHT AND DENSE
You can froth 125ml of hot milk in less than 2½ minutes.
1. Plug in the Milk Frother and switch it on at the socket.
2. Make sure the Milk Frother is filled to at least the ‘MIN’ mark and no further than
the ‘MAX FROTH’ mark inside the jug, or the Milk Frother will burn dry or overflow
through the lid.
3. Press the HOT FROTHING LIGHT or HOT FROTHING DENSE button once. The whisk
will start to rotate and the light will illuminate RED, to show it is frothing warm milk.
4. The light will flash three times and go out. The whisk will automatically stop when
your frothed milk is ready.
5. If you wish to stop the appliance at anytime, press the OFF button.
TO MAKE HOT MILK
You can heat 250ml of hot milk in less than 3 minutes.
1. Plug in the Milk Frother and switch it on at the socket.
2. Make sure the Milk Frother is filled to at least the ‘MIN’ mark, and no further than
the ‘MAX MILK’ mark inside the jug, or the motor will burn dry or over flow through
the lid.
3. Press the HOT MILK button, the whisk will start to rotate and the light will illuminate
RED, to show it is heating milk.
4. The light will flash three times and go out. The whisk will automatically stop when
your frothed milk is ready.
5. If you wish to stop the appliance at anytime, press the OFF button.
