7
USING YOUR MILK FROTHER FOR THE FIRST TIME
WARNING:
DO NOT insert the plug into an electrical socket, or turn on the Milk Frother
before you have fully assembled it.
1. Unpack the Milk Frother, remove all the packaging materials.
2. Before first use, wipe the jug with a clean damp cloth.
3. Wash the lid, silicone ring, whisk and whisk holder in warm soapy water, rinse and dry.
4. Place the Milk Frother on a flat, dry, level, heat resistant surface. If the surface is
sensitive, place a heat-resistant board under the appliance.
5. Any excess cord can be wrapped around the cord storage area under the base unit.
Guide the cord through the gap in the base.
6. Insert the whisk holder and whisk
inside the jug. The whisk magnet will
click into place once the whisk holder is
located over the spindle.
7. Stand the jug on the base unit. Fill it with tap water to the ‘MAX FROTH’ level inside
the jug.
8. Add the lid, plug in and switch on at the socket.
9. Press the HOT DENSE FROTHING button once. The button will illuminate red, and
the whisk will start to rotate.
10.The light will flash three times and go out. The whisk will automatically stop
when the water is warm.
11. Discard the warm water, the appliance is now ready to use.
FOR FROTHING MILK
You need to use the whisk holder and whisk.
FOR HEATING MILK
You only need to use the whisk holder. To remove the whisk place your
thumbs on the whisk to click off.
