![Lakeland 62483 Instruction Booklet Download Page 5](http://html2.mh-extra.com/html/lakeland/62483/62483_instruction-booklet_3394878005.webp)
5
• To avoid injury or possible fire, do not cover the appliance when in use.
• Do not connect this appliance to an external timer or remote control system.
• An extension cable may be used with care. The electrical rating of the cable should be
at least as great as the appliance. Do not allow the cable to hang over the edge of the
worktop or touch any hot surfaces.
• This appliance complies with the basic requirements of Directives 2014/30/EU
(Electromagnetic Compatibility) and 2014/35/EU (Low Voltage Directive).
•
WARNING:
A cut off plug inserted into a 13amp socket is a serious safety (shock)
hazard. Ensure the cut off plug is disposed of safely.
•
CAUTION:
The plastic bags used to wrap this appliance or the packaging may
be dangerous. To avoid risk of suffocation, keep these bags out of reach of
babies and children. These bags are not toys.
• Keep the Milk Frother, including its plug and lead away from hot ovens, electric and gas
burners, flames and hot surfaces.
•
DO NOT
touch any moving parts whilst in use. Always switch off the appliance and
wait until the whisk has stopped rotating before you open the lid.
• Surfaces may be hot when the Milk Frother is in use or just used. Use the handle and
take care when removing the lid.
• Milk will remain hot for a considerable time after heating and is a scalding hazard.
• Ensure the lid is fully closed before switching on.
DO NOT
open the lid when milk is
heating, scalding may occur if the lid is lifted.
• Ensure the Milk Frother is securely on the base before switching on. The Milk Frother
must be only used with the base supplied by the manufacturer.
DO NOT
use the base
with any other appliances.
•
WARNING:
Never touch the live parts on the base unit. Always make sure the
appliance is switched off at the socket, until in use with the jug in position.
• Keep hands away from the spout when milk is heating, steam is hot.
• The Milk Frother must be filled to at least the ‘MIN’ mark inside before it is switched on.
DO NOT
fill beyond the ‘MAX MILK’ or ‘MAX FROTH’ level.
•
DO NOT
lift or move the Milk Frother while in use.
• Remove the Milk Frother from the base to fill or pour. Pour slowly and do not over-tilt
the Milk Frother.
•
DO NOT
leave the Milk Frother unattended while it is frothing milk.
•
DO NOT
use metal spoons or other utensils with sharp edges to spoon milk or froth
from the appliance. These will scratch the coating inside. Pour only.
• Only heat milk in the Milk Frother, do not heat any other liquids, apart from the
first use.
•
DO NOT
operate empty.