background image

15

TECHNICAL INFORMATION

•  Power: 1800W.
•  Voltage: 220-240V.
•  Frequency: 50-60Hz.
•  RPM: 40-210RPM. Min. ±20%.
•  Flex length approx. 100cm. (39¼”).
•  Product weight: 8kg.

ELECTRICAL CONNECTIONS

THIS APPLIANCE MUST BE EARTHED

This appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in 

all homes fitted with sockets to current specifications.

CHANGING THE 10 AMP FUSE

Use a 10 amp BS1362 fuse. Only BSI or ASTA approved fuses should be used. If you are 

unsure which plug or fuse to use, always refer to a qualified electrician.

Note:

 After replacing or changing a fuse on a moulded plug which has a fuse cover, the 

cover must be refitted to the plug; the appliance must not be used without a fuse cover. 

If lost, replacement fuse covers can be obtained from an electrical shop. This appliance 

complies with the following EU Directives: 2014/35/EU (Low Voltage Directive) and 

2014/30/EU (EMC Directive).

RECYCLING YOUR ELECTRICALS

The Waste Electrical and Electronic Equipment (WEEE) Directive requires 

UK distributors to maximise separate collection and environmentally 

friendly processing of WEEE.
UK distributors (including retailers) are required to provide a system which 

allows all customers buying new electrical equipment the opportunity to 

recycle their old items free of charge.
As a responsible retailer, we have met these requirements by offering all 

customers buying new electrical and electronic equipment free take-back 

of their old electricals on a like-for-like basis.

Summary of Contents for 32925

















Reviews: