PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: 260-918-2758
Fax: 260-918-3540
E-mail [email protected]
Use the provided wrench to remove the battery
cover from the bottom of the light
The battery is not connected when shipped.
Connect Battery: Caution! Align notches before joining
both connectors.
Forcing or connecting backwards may
damage the light or the connector.
MALE NOTCH
FEMALE NOTCH
Power Level + OFF Button
Power
Setting
* Run
Times
100%
6-8 hrs
80%
7-9 hrs
65%
10-12 hrs
50%
13-14 hrs
35%
15-17hrs
20%
17-22 hrs
OFF
OFF
1
2
3
SOLAR PILING LITE
– 8”
MODEL: LL-SPL-8-X-X
www.lakelite.com
www.solarpilinglites.com
NEW MAGNET
SWITCH OPERATION
CHANGING BRIGHTNESS LEVELS
Wave the magnet over the solar
panel at night until you find the
activation area which changes
the brightness level
Make a quick up & down motion
over this area to change between
brightness levels & OFF
NOTE:
moving too
slowly may activate the
magnet switch multiple
times going through
multiple levels at once.
A quick motion will help!
•
Turn the light over or cover the solar panel. The LED will turn on. If not, then push the button, and select brightness level.
•
Run times will vary significantly based on factors such as; Sun Exposure, Season, Angle of Sunlight, Geographic Location, Shading,
Installed Location/Position, Battery Condition, and most importantly the Brightness Setting in comparison to the season.
•
The following run times should only be used as a general reference and are not guaranteed. Consider your local environment
•
Lower brightness settings use less power and leave more reserve power for cloudy days where less recharging takes place.
NOTE: RUN TIMES ARE BASED ON A FULL CHARGE: MANY FACTORS MAY PREVENT A FULL CHARGE SEE BELOW
