Place light onto piling and mark holes. Drill small pilot holes
in piling with drill bit. Use screwdriver to secure the light to
your piling with mounting screws
–
Not Included
Verify that the top screws are tight to provide a good seal
for the lens. Verify that the base of the light is secured to
the piling.
7
8
Use the provided wrench and screws to secure the silicone
pad and battery cover. Fully tighten screws to ensure the
chamber is water proof.
PO BOX 414
105 W. Simon St.
Laotto, IN 46763
Phone: 260-918-2758
Fax: 260-918-3540
E-mail [email protected]
Use Provided wrench and top screws to assembly your
light together. NOTE: The seal must be in the correct
position before tightening down the top to the base.
3.2v LiFePo4
3000mA
Silicone Pad
Battery Cover
Cover Screws
Seal
Top
Top Screws
Lens
Base
5
6
Wood Piling
Mounting Screws
Screwdriver
Wood Piling
SOLAR PILING LITE
– 8”
MODEL: LL-SPL-8-X-WBA
www.lakelite.com
