Laizhou Huibang Machinery MS36127A3, Owner'S Operating Manual

Page: 6 / 15

Model MS36127A3 is easier to operate than a conventional drill press equipped with a mortising attachment. The model
MS36127A3 is made of cast-iron and steel for rigidity and stability. The mortiser comes with a standard 3-jaw type key
chuck for positive gripping of mortising bits.
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping carton(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT
PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY
NOT DEPICT THE ACTUAL COLOR, LABELING OR ACCESSORIES AND MAY BE INTENDED
TO ILLUSTRATE TECHNIQUE ONLY.
HOLLOW CHISEL MORTISER PARTS
Fig. 1
SPECIFICATIONS
Motor 1/2HP (input), 1PH, 230V, 50Hz, Class B
Spindle speed 1400rpm
Chisel capacity
1/4” – 1/2”
（
6
—
12mm
）
Max.Mortising Depth
3
” （
76mm
）
Chisel shank
3/4
” （
19.05mm
）
Spindle to Fence(max.)
3-1/2
” （
90mm
）
Chisel to Table(max.)
5
” （
127mm
）