GENERAL SAFETY RULES
1.
Keep work area clear.
Cluttered areas and benches invite injuries.
2.
Consider work area environment.
Do not expose tools to rain. Do not use tool in damp or wet locations. Keep work
area well lit. Do not use tools in the presence of flammable liquids or gases.
3.
Guard against electric shock.
Avoid body contact with earthed or grounded surfaces(e.g. pipes, radiators, ranges,
refrigerators).
4.
Keep other people away.
Do not let other persons, especially children, not involved in the work touch of the tool or
the extension lead and keep them away from the work area.
5.
Store idle tools.
When not in use, tools should be stored in a dry locked-up place, out of reach of children.
6.
Do not force the tool.
It will do the job better and safer at the rate for which it was intended.
7.
Use the right tool.
Do not force small tools to do the job of a heavy-duty tool. Do not use tools for purposes not
intended, for example, do not use circular saws to cut tree limbs or logs.
8.
Dress properly.
Do not wear loose clothing or jewelry they can be caught in moving parts. Non-slid footwear is
recommended when working outdoors. Wear protective hair covering to contain long hair.
9.
Use protective equipment.
Use safety glasses. Use face or dust mask if cutting operations create dust.
10.
Connect dust extraction equipment .
If devices are provided for the connection of dust extraction and collection
equipment, ensure these are connected and properly used.
11.
Do not abuse the cable.
Never pull the power cable to disconnect it from the socket. Keep the cable from the
socket. Keep the cable away from heat, oil and sharp edge.
12.
Secure work.
Where possible use clamps or a vice to hold the work. It is safer than using your hand.
13.
Do not over reach.
Keep proper footing and balance at all times.
14.
Maintain tools with care.
Keep cutting tools sharp and clean for better and safer performance. Follow instructions
for lubricating and changing accessories. Inspect power cables periodically and if damaged have them replaced by an
authorized service facility. Inspect extension cables periodically and replace if damaged, Keep handles dry, clean and
free from oil and grease.
15.
Disconnect tools.
When not in use, before servicing and when changing accessories such as blades, bits, cutters,
disconnect tools from the power supply.
16.
Remove adjusting keys and wrenches.
Form the habit of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
17.
Avoid unintentional starting.
Ensure switch is in " OFF " position when plugging in.
18.
It`s recommended to wear hearing protection to reduce the harm arising from noise.
19.
Stay alert.
Watch what you are doing, use common sense and do not operate the tool when you are tired.
20.
Check damaged parts.
Before further use of the tools, It should be carefully checked to determine that it operates
properly and perform its intended functions. Check the alignment of moving parts, binding of moving parts, breakage of
parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service center unless otherwise indicated in this instruction manual. Do
not use the tool if the switch does not turn on and off.
Summary of Contents for MS36127A3
Page 12: ...Parts Diagram ...
Page 13: ...Parts List ...
