RAMP DVK Guide
Version 4.0
Americas: +1-800-492-2320 Option 3
10
Laird Technologies
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
www.lairdtech.com/ramp
S
OFTWARE
USB Software Installation
To install the USB software, follow these steps:
1.
Disconnect the SDK hardware from the USB port of the PC (if it is currently connected).
2.
Close any open USB driver installation menus.
3.
Locate the RAMP product page on the Laird website:
4.
Scroll down to the RAMP RF Development Kits section.
5.
Click the USB Drivers link to download the USB drivers .zip file.
SDK Software Installation
To install the SDK software, follow these steps:
1.
Locate the RAMP product page on the Laird website:
2.
Scroll down to the RAMP RF Development Kits section.
3.
Click the Configuration Utility link to download the DVK software .zip file.
4.
Install the development kit software. The first time the software is run, the following message displays:
5.
Click OK.
The software attempts to open COM1 of the PC. If there is a conflict or the port does not exist, the
software shows the port as unavailable. This may occur for one of the following reasons:
There is other software running that has control over the COM1 port. Locate this software and
shut it down while running the Laird OEM software.
The PC does not have a COM1 port or the port has been disabled.
