800-898-0759 • 845-339-9555 • 2000 Sterling Road • Mount Marion, NY 12456 • www.lairdtelemedia.com
- Page 5 -
LTM-CPDV
CapDiv
™
Portable
DV Disk Recorder
F
IGURE
2.0 / B
OTTOM
P
ANEL
F
UNCTIONS
IEEE 1394 6-Pin Connector
This connector is used to connect to a compatible camera or NLE. POWER IS
NOT PROVIDED VIA THE 6PIN CABLE . THE CapDiv
™
MUST BE POWERED
EXTERNALLY AT ALL TIMES.
Power-Idle & Mode Switch (three positions)
This switch has three-positions. In the center position, power is turned off and the
CapDiv
™
is put in standby mode. Sliding the switch off center and toward the
“VTR” position turns the CapDiv
™
on and initializes VTR mode. Sliding the switch
off center and towards the “HDD” position turns the CapDiv
™
on and in the AV
HDD mode.
NOTE: When switching between HDD and VTR, allow two seconds at
the center position to permit idle reset. If the switch “pause”
operation is not done, the CapDiv
™
may not initialize in the
proper mode.
DC Power Connector
Power can be supplied to the CapDiv
™
via this connector. The device is designed
to operate over a 10V to 24V DC range with the center post connected to the
positive terminal. DC Current draw is 1.5 Amps.
1
1
2
3
2
3
