Lainox Aroma by Sapiens User Manual Download Page 33

Page: 33 / 62

•

SETTING THE DATE AND TIME

OPERATIONS

19.1 •

With the appliance live and display off,

press button

, the display

shows

[USb

turn knob

until

[tIM]

is displayed, press

the knob to confirm the selection.

• Setting the hour

The display

shows

[h]

, and display

shows the time set.

Turn the knob

to modify the hour

• Setting the minutes

Turn the knob

again, display

shows

[Min]

and display

shows the minutes set.

Turn the knob

to modify the minutes

• Setting the day

Turn the knob

again, display

shows

[dAY]

and display

shows the day set.

Turn the knob

to modify the day

• Setting the month

Turn the knob

again, display

shows

[Mon] and display

shows the month set.

Turn the knob

to modify the month.

• Setting the year

Turn the knob

again, display

shows

[YEA]

and display

shows the year set.

Turn the knob

to modify the year

Once the date and time has been set,
press button 6 to memorise the values.

OPERATIONS

•

DOWNLOAD HACCP LOG

20.1 •

With the appliance live and display off,

press button

, the display

shows

[USb]

turn knob

to confirm the selection

The display

shows

[hAC]

Loosen the protection screws of the USB

port until the protective plate is rotated
by 90° in order to have access to the USB
port. Insert the pen drive into the oven USB
port.

Press the knob

to confirm the selection.

When download has been completed, the

displays

and

show

[USB END]

ATTENTION:

When the USB pen drive has

been removed, reposition the protective
plate and tighten the protection screws.

If the USB pen drive is not inserted, the

displays

and

show

[USB Err]

Insert the USB pen drive and press knob

to repeat the procedure.

90028111rev03

Summary of Contents for Aroma by Sapiens































































Search results

Summary of Contents for Aroma by Sapiens

Reviews:

Related manuals for Aroma by Sapiens

Brands by name

Popular brands

Lainox Aroma by Sapiens, User Manual

Search results

Summary of Contents for Aroma by Sapiens

Reviews:

Related manuals for Aroma by Sapiens

Brands by name

Popular brands