21
12
•
SETTING THE CORE PROBE
Foreword
The core probe allows cooking to be regulated
by monitoring the temperature at the core
of the product. This device overrides the
time setting, and cooking stops as soon as
the temperature at the core of the product
reaches the selected value.
The core probe can be handily used as a
portable thermometer, by inserting the probe
in connection
A1
in any time operation
mode; with the oven on stand by, keeping
key
11
pressed for a few seconds, display
9
will show the probe temperature for
a few seconds. This permits checking the
temperature at the core of the food not being
cooked and therefore outside the oven.
OPERATIONS
12.1
•
COOKING WITH CORE PROBE
Caution:
When cooking with the core probe
and
“Err SP”
is shown on displays
7 and 9
,
it is necessary to connect the core probe to
connection
A1
. If the first cycle is used for
preheating, it is necessary to keep the probe
outside the cavity; otherwise the program
cannot start.
Once the oven temperature has been set (as
described under the relevant headings), press
key
11
and turn knob
10
to set the required
core temperature. Connect the core probe
to connection
A1
, insert the probe into the
food (see
“Hints on using the core probe”
),
and proceed according to the cooking mode
selected.
Therefore, if you have chosen...
PRACTICAL EXAMPLE
Setting
Mode:
Convection
Oven temperature:
140°C
Time:
Infinite
Core temperature:
78°C
What happens
Once the temperature at the core of the food
reaches 78°C, with the oven temperature
at 140°C, the heat source shuts off and will
automatically come into operation again when
the core temperature drops by 1°C.
In practice, it is no longer the oven temperature
setting that regulates the operation of the heat
source, but the temperature selected for the
core probe.
Caution:
Wait for a few seconds after inserting
the core probe in connection
A1
(the time it
takes the electronic card to identify the probe),
then start cooking with key
15 START/STOP.
12.1 a
•
ONE-PHASE
MANUAL
COOKING:
press
key
15
to start
cooking
12.1 b
•
MULTI-PHASE
MANUAL
COOKING:
pass on to
setting the
next phase or
press key
15
to start the first
phase of the set
cooking
12.1 c
•
A PROGRAM TO
BE SAVED:
pass on to
setting the next
phase or wait
for automatic
saving of the
set program
90028111rev03
