Copyright © 2021 Laia · www.laiatech.com
19
All rights reserved
6
Diagnostic
6.1 Call Information
After the meeting starts, you can go to the "Diagnostic > Call Information" page to get
a real-time view of the quality of the meeting.
Precondition
The real-time parameters of the meeting can only be displayed after the meeting
has started.
Step
Step 1
Enter the GUI main interface, select “Diagnostic > Call Information”.
Step 2
View terminal call information. The parameter description is shown in the
following table.
Step 3
End.
Parameter
How to understand
Whether to Encrypt
Enable or disable encryption.
Call Bandwidth
Actual call bandwidth after negotiation.
Audio Protocol
The actual audio protocol after the capability negotiation.
Audio Rate
The bandwidth allocated to the audio.
Primary Video Bandwidth The bandwidth allocated to the primary video.
Primary Video Rate
The real-time rate of the main video, which changes dynamically
in real time.
Master Video Protocol
The actual primary video protocol after capability negotiation.
Primary Video Resolution The resolution of the main video at the current conference.
Primary Video Frame
Rate
The number of frames displayed per second by the main video,
which varies dynamically based on the current network
environment.
