Copyright © 2019 Laia · www.laiatech.com All rights reserved
13
Input http://192.168.100.88 to IE (better with IE
web browser, others will cause little latency), a
login window pop up, input login name: admin,
password: admin, shown as below:
After login, shown as below:
If user first time use this camera by internet
(only for new user), must install a player
software (VLC). Please go to VLC website
http://www.videolan.org/vlc/#download and
Install VLC (player software).After installation,
login again, will show as above:
5.5 IP Camera controlled by WAN
5.5.1 Setup IPC controlled by dynamic DNS
Two dynamic DNS: Dyndns.org, 3322.org.
Router Port Mapping:
Take Tenda router for example, enter the
Router Home Page (interface page), select
“Advanced”- “Virtual Server”, add a new port
number in “Ext Port”, add a new port number in
“Int port”, put camera IP address to “Internal IP”,
then select “Save”, shown as below:
5.5.2 Dynamic DNS visit camera
Set domain name to camera, setup the
parameter, then dynamic DNS can access
camera. Access link: http://hostname: port
number. For example, setup host computer
name: youdomain.f3322.org, the camera port
number is 89, the access link should be
http://youdomain.3322.org:89.
If the camera port default is 80, then
unnecessary to input port number, use host
name can access camera directly.
5.5.3 VLC stream media player monitoring
Visit VLC media server procedure
Step 1
Open VLC media player.
Step 2
Click “Media > Open Network Stream”,
or click “Ctrl + N”; as below:
