laguna SuperMax SuperBrush 49, Owner'S Manual, Page: 7 / 42

LAGUNATOOLS.COM 7
• Lead from lead based paint.
• Crystalline silica from bricks, cement and other masonry
products.
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals, work in a well-
ventilated area and work with approved safety equipment, such as
face or dust masks/respirators that are specifically designed to filter
out microscopic particles.
9. Do not operate this machine while tired or under the influence of
drugs, alcohol or any medication.
10.Make certain the switch is in the OFF position before connecting the
machine to the power source.
11.Make certain the machine is properly grounded.
12.Make all machine adjustments or maintenance with the machine
unplugged from the power source.
13.Form a habit of checking to see that all extra equipment such as
adjusting keys, wrenches, scrap, stock, and cleaning rags are removed
away from the machine before turning on.
14.Keep safety guards in place at all times when the machine is in use. If
removed for maintenance purposes, use extreme caution and replace
the guards immediately when maintenance is complete.
15.Make sure the dust collector is on a flat even surface and the wheels
locked in place before use.
16.Check damaged parts. Before further use of the machine, a guard or
other part that is damaged should be carefully checked to determine
that it will operate properly and perform its intended function. Check
for alignment of moving parts, binding of moving parts, breakage of
parts, mounting and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or
replaced.
17.Provide for adequate space surrounding work area and non-glare,
overhead lighting.
18.Keep the floor around the machine clean and free of scrap material, oil
and grease.