laguna SmartShop II SUV, Manual

Page: 9 / 26

8
Teach ZPO = This button will write the current X and Y locations
to the Zero Point Offset selected from the upper right field G54-
G59.
Reset Relative Coord’s Display = This button resets the Relative
position of X and Y to Zero. Use would be a digital tape
measure.
Disable Switch Limits = This button is used for maintenance
and repair issues only. There is no operator function for this.
Jogging Functions = There are 3 settings for Jogging.
1
st
– Select the Jog type, Either Continuous Jog or a Step jog at a
specified increment.
2
nd
– For continuous Jog, select the percentage of the max
speed set in the controller. If max speed is 1000 ipm then 50%
Jog speed will move the Axis at 500 ipm.
3
rd
– For step jog select the step size you wish to increment jog
at for each push of the jog + or – button.
Use the + and or – button to move the axis forward or back.
Tool Touch Sensor Input = This is an indicator to verify the Tool
Touch Off (TTO) switch is working properly.