10
MDI field
= Manual Data Input is for executing a single line of
code at a time or a M code. Simply input the desired function
and press Execute Command to activate.
Feed Rate Field
= This field displays the programmed feed rate
in the G code.
Spindle On/Off Delay
= This is used to force an On and Off
delay in the control of the spindle. This is in lieu of a
programmed delay or used as an additional delay to the
programmed ramp up and down.
Max Spindle Speed
= This field must match the maximum
speed you speed can rotate. This is only used if your factory
spindle is replaced with a different top speed.
Enable Control Blocks
= This is function for higher end users
that want to use control blocks such as shown below:
Summary of Contents for SmartShop II SUV
Page 3: ...2 ...
Page 4: ...3 ...
Page 24: ...23 The alarms displayed on this screen are Axis specific ...
Page 25: ......
