laguna SmartShop II SUV, Manual

Page: 7 / 26

6
Start at Tool = This field allows the program to jump to a
specific tool for it’s starting point. Input the tool number
desired then press run. There will be a slight delay while the
code is scanned to the requested starting point.
Coord’s selector /Lower right drop down = This is the selector
for the X,Y, and Z coordinates displayed at the bottom of the
Main page.
Machine coordinates – These are the actual distances from
machine Zero.
Relative coordinates – These are resettable to zero from
current position and equate to a digital tape measure function.
ZPO coordinates – These are based on the G54-G59 set and
selected from the Jog screen.
CNC Monitor = These 5 lines are displaying the CNC G-code as it
is running.