17
Execute Automatic Touch Off (TTO)
= Select the tool in which
needs to be measured and press The Execute button. The
machine will gather the correct tool holder and proceed to the
TTO switch. Z will rapid to the Z pre dimension in the machine
settings then slow until it finds the switch.
Manual Setting of Tool length
= Use the Jog function to move
the cutter to the table or work surface. Press the
Teach Tool
Length
button to measure the Z axis distance. Press
Set Tool
Data
to write the measurement to the machine settings.
Failure to press the
Set Tool Data
will lose the measured value.
Set Tool in Spindle
= This field allows for the manual
adjustment of the active tool physically in the spindle. If you
manually swap tool cones around you must update the
machine so the active tool is properly represented.
Tool Touch Sensor Input
= This is an indicator to verify the Tool
Touch Off (TTO) switch is working properly.
Summary of Contents for SmartShop II SUV
Page 3: ...2 ...
Page 4: ...3 ...
Page 24: ...23 The alarms displayed on this screen are Axis specific ...
Page 25: ......
