laguna Sheartec II JX 8, Owner'S Manual, Page: 17 / 47

JX|8 Sheartec:II Jointer \ Setup Assembling 17
Assembling
Machine Preparation and Setup:
1. The machine may be supplied with four installed wheels (depending on model), two of which are
locking style (infeed side). Lock these two wheels, by turning the thumbscrew clockwise, when the
machine is placed and before operation (Fig. 4). Loosen the two thumbscrews when moving the
jointer.
FIGURE 4: WHEEL LOCKS
2. Position the Jointer Body on the Stand with the cutterhead pulley directly above and on the same side as
the motor pulley.
NOTE: Have help lifting and positioning the jointer body onto the stand! Or use a forklift as
described earlier.
FIGURE 5: ASSEMBLING JOINTER