laguna PX12, Owner'S Manual

Page: 28 / 38

28
Snipe
1. Incorrect setting for
infeed, out-feed
rollers, pressure bar
2. Inadequate support
of long boards
1. Adjust feed system
2. Support long
boards with
extension rollers
Fuzzy Grain
1. Planing wood with
a high moisture
content
2. Dull knives
1. Allow wood to dry
properly
2. Rotate, replace or
sharpen knives
Poor feeding of lumber
1. Inadequate feed roll
pressure
2. Planer bed dirty
3. Dirty feed rollers
4. Incorrect setting for
in-feed, out-feed
rollers
1. Adjust feed roll
tension or lower
feed rollers
2. Clean pitch and
residue off table
with a non-
flammable solvent
3. Clean feed rollers with
a non- flammable
solvent
4. Adjust feed system
Dust Collection
To ensure proper operation and longest knife life it is important to
maintain full air flow to your dust collection system. Make sure the filter
media is clean and there are no obstructions in the ducting.