34
PX|20 Sheartec:II Planer \ Wiring
Wiring
WARNING
REVIEW
PRIOR TO ANY WIRING PROCEDURES.
MPLANPX20-0130
VOLTAGE
220V
PHASE
1PH
HERTZ
60Hz
FULL LOAD AMPERAGE
23 AMPS
Below are RECOMMENDATIONS to be used for this machine based on the above
information. Variables that may affect this are:
·
Actual voltage supplied to the machine
·
Electrical code that must be met in your local province.
An electrician will verify that all the demands are met to properly wire the machine. If you have
absolutely any doubt when wiring this machine - please consult with a qualified electrician.
PLUG/RECEPTACLE
Not Included
WIRING (Gauge)
See Jacket Printing
CIRCUIT BREAKER
30 Amp Minimum
7
Summary of Contents for MPLANPX20-0130
