15
PX|20 Sheartec:II Planer \ Setup Placement & Unboxing
5. Locate it close to a power source and dust collection.
6. Allow an area for the storage of blanks, finished products and tools.
Unboxing
WARNING!
·
THE MACHINE WEIGHS 638 LBS (289KG). ENSURE THAT YOU HAVE ENOUGH PEOPLE TO DO THE JOB SAFELY.
·
IF YOU HAVE ANY DOUBT ABOUT THE DESCRIBED PROCEDURE, SEEK PROFESSIONAL ASSISTANCE. DO NOT
ATTEMPT ANY PROCEDURE THAT YOU FEEL IS UNSAFE, OR THAT YOU DO NOT HAVE THE PHYSICAL CAPABILITY OF
ACHIEVING.
This step requires a forklift. The PX20 is heavy, be careful when lifting and handling it! Failure to comply
may cause serious injury and/or damage to the machine and/or property! Use a forklift to remove PX20
from pallet and place on floor.
NOTE: Another option to remove the planer from the pallet is to attach the included hooks to frame of
machine at each of the four corners (Fig. 1). The hooks and bolts are included in the hardware kit. The
machine can then be lifted with a harness and forklift. Remove and save hooks for later movement
scenarios.
FIGURE 1: LIFTING PLANER WITH HOOKS AND HARNESS
FIGURE 2: PALLET
Summary of Contents for MPLANPX20-0130
