17
PX|20 Sheartec:II Planer \ Setup Assembling
Assembling
Machine Preparation and Setup:
1. Level machine using the four leveling feet on each of the four corners. Lock leveling feet into position
with the nut on the leveling foot stud (Fig. 3).
FIGURE 3: LEVELING FEET
(OPTIONAL) If Installing Unverisal Casters
FIGURE 28: CASTER INSTALLATION
Installing universal caster set (Fig. 28):
1. Raise and block planer for attaching caster set.
2. Assemble swivel caster into swivel caster
bracket (straight bracket) by placing bolt #5
through bracket and caster and securing with
lock nut #4. Then place bolt #6 down through
bracket into caster mount.
3. Attach swivel caster to front (infeed) center of
frame with four bolts #1, washers #2 and nuts
#3. Tighten all four bolts.
4. Assemble caster (wheel) #.2 to bracket #.1
using bolt #.3 and nut #.4. Repeat this process
for second caster.
5. Attach caster assembly #9 to rear (outfeed) side
of frame using two bolts #1, two washers #2 and
two nuts #3. Repeat process for both casters.
Tighten all four bolts.
6. Carefully remove blocks with planer resting on
casters.
Summary of Contents for MPLANPX20-0130
