laguna LT14 series, User Manual

Page: 38 / 55

38
Coiling the blade.
If you need to coil the blade, coil as follows.
1.
Lightly place your foot on the bottom of the blade. It is recommended that the blade is
placed on material that will not damage the blade teeth [wood or cardboard]. Your foot is
there to give stability, and not to clamp the blade, so do not exert excessive force, or the
teeth / band may be damaged.
2. Place your hands as shown, with your thumbs facing out.
3. Twist your wrists so that your thumbs are facing each other. The top part of the blade is
now twisted in the teeth facing in the opposite direction.
Note.
You may have to over twist the blade to get the top of the blade to flick over.
4. Fold the blade down until three coils are generated.
Remove your foot and shake the blade until three even diameter coils are achieved.
Note. Safety gloves and goggles must be worn when handling the blade as the teeth are
sharp and could cause injury.
Hand position Blade coiling Blade coiling
Blade coiling Blade coiled