laguna LT14 series, User Manual

Page: 20 / 55

20
Bottom blade guards
Bottom blade guard
It is very important to have the blade
covered for safety. Guards are provided at
the top of the lower door and just above the
table dust port. The door guard must be
moved vertically and clamped in position
before operating the bandsaw. To open the
door, the guard will have to be lowered.
Should the blade break, the guards protect
the operator from the blade escaping under
the table.
A third blade guard is provided that must be
in position when running the machine. To fit
or remove a blade, this guard will have to be
removed.
Electrical connection
Note. The machine may not be supplied
with an electrical plug, as the type of plug
will depend on the installation.
Blade guard
Switch in transport
position
Switch in operation position